Welcome to
the forums at bobdunsire.com
bobdunsire.com forums bobdunsire.com forums
You can reset your password by going here. Be sure to try your current email and any email addresses you may have had in the past.
Otherwise please use the Contact Us link at the bottom of the forums. In order to help you, please provide the following info: Your Display Name from the old forum and any possible email addresses you would have used before. Without that info we cannot locate your account.


Go Back   Bob Dunsire Bagpipe Forums > Great Highland Bagpipe > Beginners, Intermediate, +
Register FAQ Calendar Search Today's Posts Mark Forums Read

Beginners, Intermediate, + Discuss issues, tackle problems, share experiences, ask questions, and look for specific help...

Platinum Sponsors
Reply
 
Thread Tools Search this Thread
Old 03-22-2019, 01:33 AM   #21
petercl
Forum Member - Shy or Quiet
 
Join Date: May 2014
Location: Queensland, Australia
Posts: 6
Default Re: Balancing chanter

Thanks Murray and Nate. I Have just put a new easy Gilmour reed in the Kyo chanter and have balanced it. I tuned in high G, F and C with tape. May I say it is a pleasure to play. Thanks for the info on the chanter Murray. Yea Nate, but we are in the information/opinion age and with social media - the editor's suggestion ain't going to happen - ha, ha.
petercl is offline   Reply With Quote
Gold Sponsor
Old 03-22-2019, 04:45 AM   #22
pancelticpiper
Holy smoking keyboard!
 
Join Date: Sep 2005
Location: WV to the OC
Posts: 10,377
Default Re: Balancing chanter

Yes in a simple way you would put the reed at the height in the reed-seat where High A and Low A agree.

But it's often not as simple as that, as we all know.

It often comes down to "majority rule", or in other words what reed-height results in the least tape.

If balancing High A to Low A meant that the whole scale got progressively flatter as I went up, meaning putting tape the on all the low hand holes to match the flat high hand, I would sink the reed until the high hand and low hand were balanced, even though this resulted in a sharp High A. I'd rather have tape on High A than on the whole low hand.

Someone said "why tape Low A?" It's not ideal, but if Low A is the outlier, too sharp in an otherwise balanced chanter, I would.

And obviously in a Pipe Band, or when playing with Pipe Organ or orchestra, yes you have to start with a number dictated by the outside world and do whatever is necessary to get your chanter to peg at that number (be it 466 or 480 or what have you).
__________________
proud Mountaineer from the Highlands of West Virginia; Son of the Revolution and Civil War; first European settlers on the Guyandotte
pancelticpiper is offline   Reply With Quote
Old 03-22-2019, 06:02 AM   #23
Pppiper
Holy smoking keyboard!
 
Join Date: Dec 2016
Location: Massachusetts, USA
Posts: 1,056
Default Re: Balancing chanter

Quote:
Originally Posted by petercl View Post
... we are in the information/opinion age and with social media - the editor's suggestion ain't going to happen - ha, ha.
Pity ... haha.

Sounds like you're making out well. Cheers to that.

Best,
~Nate
Pppiper is offline   Reply With Quote
Old 03-28-2019, 02:33 PM   #24
burp birl
Holy smoking keyboard!
 
Join Date: Jan 2003
Location: Anchorage, Alaska
Posts: 1,645
Default Re: Balancing chanter

I haven't carefully read through all the responses so this might be a repeat but have you tried the Braw Tuning Ap? It's very helpful. There's a review about it in the Review Tab.....


I splurged and got it.....love it love it love it! It helps me to quicken the time spent tuning note for note and it helps train my ear.



Jenni
__________________
Don't take life seriously! You'll never get out of it alive!
burp birl is offline   Reply With Quote
Old 09-14-2019, 06:12 PM   #25
el gaitero
Holy smoking keyboard!
 
Join Date: Feb 2005
Location: Estados Unidos
Posts: 6,941
Default Re: Balancing chanter

WillyWog .....FYI....and as a matter of fact..the design spec of your McCallum MK 2 chanter is 474-476hz.( per McCallum)

Two bands I coach use about 30 of these chanters...consistently pitched at 475hz ..using Shepherd standard reeds ( not ridge cut).
Easy-Medium strength ( 26Ē - 30Ē h2o depending on the piper).
These usually set at ca 7/16Ē exposed binding..not more.
Generally the Gilmour reed, in my experience, tends to be a bit flatter reed than the Shepherd.
Pipers Hut In OH does a good job in bench checking reed h2o strength for me or students laying in reeds.
el gaitero is online now   Reply With Quote
Old 09-14-2019, 06:56 PM   #26
Patrick McLaurin
Holy smoking keyboard!
 
Join Date: Aug 2006
Location: Lubbock, TX
Posts: 5,898
Default Re: Balancing chanter

Quote:
Originally Posted by WillyWog View Post
So after tuning the chanter as you say in your video.

What about the other notes that are sharp or flat.. ??

Do I tune them to O on the tuner or leave them where they fall and play thing chanter that way. Or fiddle around get all the notes on "O".. ??

Thanks again
Willy
You will want to fine tune the other notes, and hoping any that are out of tune are sharp so that you can easily apply electrical tape, or similar, to the top of the hole to flatten it just the right amount. No other notes will be tuned bang on center using a chromatic tuner like a Korg. The details are in this blog post, but you can just scroll to the bottom and look at the image created by forum member bob864, or similar.

https://www.patrickmclaurin.com/wordpress/?page_id=2420

If you have an app that does bagpipe specific tuning, it does all the leg work for you and will have you tune the notes bang on center.
Patrick McLaurin is offline   Reply With Quote
Old 09-15-2019, 08:14 AM   #27
David Murry
Holy smoking keyboard!
 
Join Date: Jan 2005
Location: Putnam County, NY
Posts: 1,212
Default Re: Balancing chanter

Patrick has many insightful tutorials on tuning, as also has the “ear” to support his suggestions.

There is a stigma about taping low A on principle alone.

I will paraphrase a common sense sentiment Jim McGillivray stated years ago along the lines “ I’ll do whatever it takes to make the instrument as well tuned and pleasing sounding as possible.” (Pipes Up video)

I almost always tape low A. I get incredible compliments from other pipers on how my chanter sounds.... until they see my low A taped a sliver and then proceed to announce the dogma of never taping low A. Oh well....

I just finished breaking in the reed in my nail chanter and pulled of the tape on low A. The reed is crisp, stable and the chanter is well balance with no tape on the octave notes (A or A’) and was more than happy to do so. I prefer NO tape wherever possible and use it when needed.

Sometimes a reed is just not good for a certain chanter. This happens but it takes time to determine that and comes more quickly with experience.

Patrick helps me recently with some issues one of my Kyo chanter (problem on my end, not the quality of Murray’s chanter- my 2 primary chanters are Kyo chanters) and we discussed how to balance it without sacrificing tone. In the end, He helps me balance out and rectify a sticking point I had.... and I taped low A.

Here is my point- we, as musicians, if our desire is the best sound possible, we should be goal oriented and have our focus on what will produce the best sound. Now, too much tape, or tape/reed seat position etc... can inhibit the best sound of course.

But not taping low A for the sake of not taping low A...? That’s not my focus.

YMMV
__________________
"A man looks down a dark tunnel he must walk, and sees no light and the end of it. It is at that moment that his character is revealed."

Last edited by David Murry; 09-15-2019 at 08:17 AM.
David Murry is offline   Reply With Quote
Old 11-01-2019, 08:12 AM   #28
el gaitero
Holy smoking keyboard!
 
Join Date: Feb 2005
Location: Estados Unidos
Posts: 6,941
Default Re: Balancing chanter

Quote:
Originally Posted by WillyWog View Post
Anyone on here recommend what make of Chanter reed to use in a McCallum Mrk2 chanter.. I been using Elliott molded reeds.. Not sure if that be the best or not..

Anyone??

Willy
Shepherd molded reed, Chesney are also quite good. If Chesney let your supplier know itís for the McCallum chanter..there are copper and brass stapled models...the brass staple is for Chesney chanters Iím told.
The Elliot you have is another great reed, Husk,Gilmour,G1.... youíd need to try them all to decide your druther...or just one and stick with it if you like it.

I havenít gone wrong with the Shepherd in two bands I coach currently using about 30 McCallum chanters...mostly mk2.
el gaitero is online now   Reply With Quote
Old 11-03-2019, 08:46 PM   #29
Patrick McLaurin
Holy smoking keyboard!
 
Join Date: Aug 2006
Location: Lubbock, TX
Posts: 5,898
Default Re: Balancing chanter

The only holes that noticeably change the pitch of other notes is the two tone holes that allow you to flatten low G. By taping them low A will go sharper, B not as much, and then it tapers off by the time you hit C#.

All other notes Iíve treated as behaving independent of tape on nearby holes.

My Colin Kyo chanters usually have in tune low G so I havenít had to decide whether to push the reed in to bring high A up to the sharpened low A or just tape low A to offset the tape on the tone holes.
Patrick McLaurin is offline   Reply With Quote
Old 11-05-2019, 05:35 PM   #30
Andrew Lenz
Moderator
 
Join Date: Nov 2001
Location: Santa Cruz, California
Posts: 10,655
Default Re: Balancing chanter

Some of this may be helpful too:

Bagpipe Chanter Reed Basics
https://www.bagpipejourney.com/artic...nterreed.shtml

Carving Bagpipe Chanters
https://www.bagpipejourney.com/artic..._carving.shtml

Andrew
__________________
Andrew T. Lenz, Jr.
BagpipeJourney.com - Reference for Bagpipers

"Keep away from people who try to belittle your ambitions. Small people always do that, but the really great make you feel that you, too, can become great." ---Mark Twain
Andrew Lenz is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Silver Sponsor

All times are GMT -7. The time now is 04:37 AM.